DELCOS NEW RIDE

[Holden202T]

yeah its the same here, 10.99 full cage thanks for coming!

[delcowizzid]

lucky we dont have all the power mods yet means we can fit a cage maybe 4 link the rear and then just bolt on some heads and better manifolds to make up for the weight and go play with the big boys . I might need some advice to ive just been assigned a 202 1 tonner for turbo and efi conversion LOL seems thats your erea of expertise

[Holden202T]

you have the advantage of a nice big engine bay in that thing!

also turbo202.com.au forum has plenty of useful info!

[delcowizzid]

yeah been having a nosey round im j-piping the headers that are on it for testing that is when i get the XA fairmont coupe out of my shed

[delcowizzid]

Vb is all fixed one lug onr snapped near right off through the weld and a second cracked quarter of the way .have rewelded all 3 in place .no pics was not enough room to fit the mig tourch let alone my camera lense lol

[delcowizzid]

not every day you get an XA fairmont coupe in for work LOL.in for engine dressup and final assembly and cam run in its a total fresh new 351 clevo and C6.i get to spend someone elses money buying all the cool bits to get it finished.also have to build driveshaft and exhaust and fit the boot full of parts.

IMGP6792_zpse8f98699.jpg (113.42 KiB) Viewed 2930 times

IMGP6796_zpsddb5d9b3.jpg (91.8 KiB) Viewed 2930 times

IMGP6795_zpsc5c8358e.jpg (108.63 KiB) Viewed 2930 times

and another little side project 202+T hq 1 tonner

IMGP6798_zps89664b04.jpg (88.22 KiB) Viewed 2930 times

[Holden202T]

nice

are you planning to run the TB like that ? I've found if you cut the bar off on the centre of the fuel rail (the one that the wiring clips into) then you can run the TB up the other way which should make accelerator linkage easier!

whats the tonner going to be auto or manual ?

[delcowizzid]

i dont have the vehicle here so im mocking up as i go then will have to go check bonnet clearance before confirming which way up the TB will go.its manual M20 4 speed

[Holden202T]

yeah they get tight

not sure how long the M20 will last, depends how wild the turbo setup is i guess!

[delcowizzid]

todays antics convert vr auto v6 loom to 202 808 loom LOL nearly ready to tape up

IMGP6802_zpsa9e62347.jpg (92 KiB) Viewed 2930 times