No doubt, he's copied the idea from the NVram modules. Not sure if this is the right area for this. I guess If you need a MEMCAL with knock board that this would be a decent alternative.
Interesting chip conversion
-
immortality
- Posts: 3820
- Joined: Thu Apr 09, 2009 2:31 am
- cars: VS,VT,VX,VE
Interesting chip conversion
Was just having a look on Trademe here in NZ and came across these from our old friend trx100
No doubt, he's copied the idea from the NVram modules. Not sure if this is the right area for this. I guess If you need a MEMCAL with knock board that this would be a decent alternative.
No doubt, he's copied the idea from the NVram modules. Not sure if this is the right area for this. I guess If you need a MEMCAL with knock board that this would be a decent alternative.
-
delcowizzid
- Posts: 5709
- Joined: Sat Feb 28, 2009 10:38 am
- Yahoo Messenger: [email protected]
- Location: Wellington NZ
Re: Interesting chip conversion
hes had them for a while he must of run low on memcals LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
Charlescrown
- Posts: 2076
- Joined: Fri Aug 05, 2011 9:58 pm
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Interesting chip conversion
This is just a Moates isn't it?
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Interesting chip conversion
same style, but just cheap headers from jaycar or similar, no pcb.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
VK_3800
- Posts: 578
- Joined: Sun Jul 04, 2010 5:15 am
- cars: SS Torana
- Location: NZ
Re: Interesting chip conversion
Just pulled one of them out of a VP '808, with the smaller opening in the case the memcal was jammed in there that tight I almost had to open the case to get it out.
Will have a read of it at some stage and see what it looks like but it'll probably go over the left shoulder. At least this way the original memcal is intact and not messed with!
Will have a read of it at some stage and see what it looks like but it'll probably go over the left shoulder. At least this way the original memcal is intact and not messed with!