Did a Log, do the values look ok?

[bck2basic]

Well I replaced the wiring on Monday and put a second hand sensor in, so it has to be the sensor. It is right near the powersteering rack boot. But The wire runs through the tune near starter motor and then up behind fuse box, around a meter and a half long, i would assume that this is ok? Do I need to fit another fuel dampner? And what do you mean by throttle voltage is too high? Is that the tps? If so is it ok to live with?

[delcowizzid]

as long as you have 1 dampner its fine.generally try to keep tps under 0.5 it seems to not be causeing any issues get o2 working and do more logs

[bck2basic]

Ok I'll replace O2 sensor soon then ill do another log.

[bck2basic]

How can I keep tps sensor voltage under 0.5? Is there any way to adjust it? Tps wiring has a split in it right near the connector, will that make the volts rise a little? Or should I replace the tps?

Thanks

[delcowizzid]

closing the TB va the minimum air screw but ide leave it where it is for now

[bck2basic]

So you don't think I need to replace the tps?

Thanks for all your help.

[delcowizzid]

nope

[VL400]

Your alternator or battery is not looking too healthy either. Seems to struggle at idle but voltage picks up a bit as the RPM increases.

[bck2basic]

Car has been sitting for 3 months. Battery is a bond one, about a year old.