DELCOS NEW RIDE

[delcowizzid]

yeah thats what i did removed schrader valve and screwed in liquid filled gauge

[delcowizzid]

progress

IMGP6838.JPG (2 MiB) Viewed 3447 times

[Holden202T]

I love the EGR support bracket

looks like it will fit in nicely too with plenty of room for a dump pipe!

whats the plan with the waste gate ... out the side of the collector near the flange ?

[delcowizzid]

haha i needed all the help i could get holding multiple peices of pipe together with 2 hands meant i needed that dodgy tempory bracket to hold the collector.yeah wastegate is next and will be run off 2 seperate pipes one off each collector entry pipe merged into one but split in half all the way upto the valve face inside the wastegate flange so it keeps both halves fully seperate untill the gate opens .both secondaries are the same length as the genies were originally so once on song and the gates open it should just flow like headers to open exhaust.if anything the secondaries are even more tuned than before turbo hope it doesnt change the note grrr

[Holden202T]

I doubt it will man, my motor didn't really change note, just gets more cranky when on boost and the gate is breathing

[delcowizzid]

sadly my grinder died and i failed to get the second half finished tonight my other grinder is in the cupboard that is buried with cars lol

[delcowizzid]

grinder fixed temporarily needs some brushes but i dodgy fixed it LOL

IMGP6840_zpsf4e9c32c.jpg (92.04 KiB) Viewed 3061 times

[delcowizzid]

headers done bar wastegating and a few braces

IMGP6842_zps03da0b61.jpg (86.99 KiB) Viewed 3061 times

IMGP6846_zps3141a22b.jpg (101.37 KiB) Viewed 3061 times

IMGP6843_zpsf897a92b.jpg (91.11 KiB) Viewed 3061 times

[antus]

Nice work!

[delcowizzid]

cooked the paint and cleared the crap out LOL
[youtube]http://www.youtube.com/watch?v=YaEM1fNI ... NUIxwV4zZg[/youtube]