36lb injectors

jezza351 · Post by **jezza351** » Wed Dec 30, 2009 6:53 am

Hey everyone was just wondering what i should cahnge my flow rate too in my vr 5litre to run a set of 36lb injectors ,any help would be appreciated. THANKS.

Post by **Holden202T** » Wed Dec 30, 2009 7:01 am

should be something like .069

jezza351 · Post by **jezza351** » Wed Dec 30, 2009 11:09 am

Thanksmate , does anyone know how to calculate injector flow rates for tunerpro for a vr v8 commie so i can learn this for myself THANKS.

Dec_head · Post by **Dec_head** » Wed Dec 30, 2009 12:10 pm

Try this thread https://pcmhacking.net/forums/view ... ?f=3&t=334

Post by **Holden202T** » Wed Dec 30, 2009 12:13 pm

thats the calculator i used to get the above number!

jezza351 · Post by **jezza351** » Thu Dec 31, 2009 9:58 am

Thanks fellas fired up the 5litre with the .069 flow rate runs perfect, once i finish the 2bar tune i will post it up in the custom tune section, car is a vrss standard stroke 5litre with a single turbo setup it runs a garrett gt3582r i have taken some pics and if anyones interested in doing a turbo install on their 5litre i am willing to give some pointers and info .Thanks again.

36lb injectors

36lb injectors

Re: 36lb injectors

Re: 36lb injectors

Re: 36lb injectors

Re: 36lb injectors

Re: 36lb injectors