Posdible Holden 5 Litre Ignition Module Failure?

[Dylan]

Bit of an update, i ent out to the shed tonight checked over some wiring nothing obvious while still on the engine anyway.
Connect up the laptop get the usual beep and click emulate all ok. Then no feedback from anything, but i can download and upload a BIN via flash tool. Screen shots to follow.

[Dylan]

First screen shot

[Dylan]

Second screen shot

[Dylan]

i think its connected ok but i dont understand hy no data is being displayed?

[Dylan]

I just noticed the dash display says MAP B I always run MAP A the jumper on my NVRAM is set to A I think.
I will get a pic up of it.

[delcowizzid]

did you click the 2 arrows to log data LOL

[Dylan]

Well rather emabarassing but all ok now that im "acquiring data"
Bean a long week at work in the heat.

[Dylan]

Temp sensor checks out ok, when i get it runing i will try and log the input from the dissy hall effect and see how it looks.
Thanks Delcowizzid here i was thinking my ecu was stuffed.

[Dylan]

check fuel reg vacuam line for fuel.also connect your laptop and look at coolant temp in the data stream when it starts having a hissy fit does coolant jump around

I haven't checked the reg yet but if the hose was fuelly what would that indicate?

[immortality]

check fuel reg vacuam line for fuel.also connect your laptop and look at coolant temp in the data stream when it starts having a hissy fit does coolant jump around

I haven't checked the reg yet but if the hose was fuelly what would that indicate?

That the fuel reg is leaking fuel directly into the intake manifold. via the vacuum hose.