Programmable Delco Ignition Module

[Chubs0191]

oh thanks Vl400 I don't think I am good enough yet to try a beta and work through any potential hick ups, not that I think there will be I just don't want to be a nuisance.

[vlt304]

can this module be configured to run an ls2 with a 58 tooth crank trigger with an 808? I have a few 808 ecus and a few wiring harnesses but sadly no ls2 or ls1 ecus and am looking to get this ls2 running for cheap it is going in a mates drift car and we all know drifters have no money. the other option I was thinking was to use an msd 6ls-2 for ignition only and the 808 for fuel only with a reluctor sensor and camira module for refrence.

[Holden202T]

VL400 will be able to confirm, but I would think that if it can interface with the cam and crank triggers then it should be right!

[VL400]

It should work fine on that trigger, its a 60-2 (58 teeth + 2 missing). There are now a few running missing tooth triggers with no problems

Flick me a PM if you do want to go ahead with it.

[Dylan]

would love to see an LS running on an 808 or a 424. Is the 424 capable of running the later autos?

[VL400]

Can certainly run the 4 speed auto's in the 4LxxE range, but the 5 and 6 speeds are certainly not plug and play with a '424 PCM.

[djbrooksy]

I'm very impressed
This would near make the 808 a one size fits all ecu

[VL400]

Thanks It actually makes many different delco ECUs and PCMs almost a one size fits all. Have them running on a few odd combo's now.

[vlad01]

I got a guy very interested in delco conversion for suby engine. So Will be needing one for these modules I reckon.

[charlay86]

Any way to run another signal to the module say from a flex output to achieve negative split for turbo rotaries?