ALDL Logger

[delcowizzid]

sweet .the usb log download isnt a biggy if my usb card reader handnt died would be fine.it may make the unit last longer not pulling the card in and out though.you have any idea why the maf Hz is saying error in the vx dual adx instead of showing numbers when in live veiw

[delcowizzid]

log from the vx if anyone wants a nose 02's rooted really need to replace both.think im gonna disable egr soon its on everywhere im lacking pull on takeoff

VXDELC03.XDL

[VL400]

you have any idea why the maf Hz is saying error in the vx dual adx instead of showing numbers when in live veiw

Its trying to show the Hz with 2 decimal places so becomes too long to fit on the display. The Hz item uses the calculation of just X so wont have decimal places, try the attached which has output digits set to show 0 decimal places.

[delcowizzid]

i had a fealing it was gonna be too many digits trying to display im on it now

[delcowizzid]

that fixed it LOL.added a few more items and bitmasks added oil pressure bitmask as ive had no oil light since fitting the 3 window cluster oil pressure bit is sometimes on sometimes off guess im up for a new switch.do these ecu's have and engine protection regime for low pressure status

[VL400]

No I dont think the oil pressure switch status is used for anything but sending to the dash.

[Holden202T]

if its anything like the vn sender im pretty sure the light goes out at about 5-6psi!

[immortality]

Hey guys,

Small problem. The logger doesn't seem to want to connect to the car (VX).

I plug the logger in into the car with the supplied cable and the logger powers up. Load the ADX (VX dual.ADX), however when I hit the connect command nothing happens and then a few seconds later it comes back with disconnected.


Not sure If I've done something wrong. Logger configuration is set to ALDL and pass through/partial are both set to off.

Thanks

edit: the logger is talking to the Senator so I think I was using the wrong ADX. I'll try again when the missus comes home.

edit2: It's L67 so the standard VX ADX won't work

[VL400]

Yeah need to use the A5_Dual ADX on a L67. The VX_Dual ADX is for flash PCMs, might rename that so it mentions flash as its for VY also.

[immortality]

Cheers mate,

Yep the A5_DUAL works

Been trying to convert one of the enhanced ADX files but no luck so far I must be missing some setting somewhere.