Hardware and Software. If you have something to sell, post it here.
The1
Posts: 4814 Joined: Mon Jan 04, 2010 10:23 am
Post
by The1 Thu Jul 17, 2014 8:33 pm
NO LONGER FOR SALE, LACK OF INTEREST AND SALES.
Guide for using memcal burner adapters in the FAQ same link below, see "EEPROM Burning Bin Stacking and Verifying Data Guide.pdf"
viewtopic.php?f=7&t=1396&p=15255#p15255
Product
https://www.greenliant.com/products/?inode=40846
Datasheet
https://www.greenliant.com/dotAsset/40840.pdf
VN - VR Memcal to Burner Adaptor
VN - VR Adaptor.JPG (87.87 KiB) Viewed 45623 times
VS - VY Memcal to Burner Adaptor
VS - VY Adaptor.JPG (132.03 KiB) Viewed 45623 times
VN - VY Memcal to Burner Adaptors
VN - VY Adaptors.JPG (159.33 KiB) Viewed 45623 times
VS - VY Memcal
IMG_9957.jpg (102.68 KiB) Viewed 45518 times
$35[/size][/b]
The1
Posts: 4814 Joined: Mon Jan 04, 2010 10:23 am
Post
by The1 Mon Aug 04, 2014 7:48 pm
SST Chips now latest revision, MTP badged, datasheet attached refers to going lead free. Still the same item and quality.
Attachments
27SF512.pdf (538.48 KiB) Downloaded 1297 times
vlad01
Posts: 8128 Joined: Mon Oct 08, 2012 6:41 pmcars: VP I S Location: Kyneton, Vic
Post
by vlad01 Tue Aug 05, 2014 12:01 pm
Do you sell the chips by them selves?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
The1
Posts: 4814 Joined: Mon Jan 04, 2010 10:23 am
Post
by The1 Tue Aug 05, 2014 12:23 pm
$5 per chip, discount over 50.
vlad01
Posts: 8128 Joined: Mon Oct 08, 2012 6:41 pmcars: VP I S Location: Kyneton, Vic
Post
by vlad01 Tue Aug 05, 2014 4:51 pm
Cool, so those with the VN-VR apter I can make memcals with final tune of 12P using the GQ-4X ?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
The1
Posts: 4814 Joined: Mon Jan 04, 2010 10:23 am
Post
by The1 Tue Aug 05, 2014 9:06 pm
Yep whack your stock memcal on it in the burner and burn it same as having it directly in the socket
antus
Site Admin
Posts: 9045 Joined: Sat Feb 28, 2009 8:34 pmcars: TX Gemini 2L Twincam
Contact:
Post
by antus Wed Aug 06, 2014 12:08 am
just keep in mind you'll need a large enough chip on the memcal. 12p is a 32kbyte file, vn/vp memcals are a 16kbyte chip and would need the sst chip also sold above.
delcowizzid
Posts: 5639 Joined: Sat Feb 28, 2009 8:38 pmLocation: Wellington NZ
Contact:
Post
by delcowizzid Wed Aug 06, 2014 12:30 am
ill pull the pin on 10 eeproms at $5 each im sick of using up the scraps lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
vlad01
Posts: 8128 Joined: Mon Oct 08, 2012 6:41 pmcars: VP I S Location: Kyneton, Vic
Post
by vlad01 Wed Aug 06, 2014 11:06 am
antus wrote: just keep in mind you'll need a large enough chip on the memcal. 12p is a 32kbyte file, vn/vp memcals are a 16kbyte chip and would need the sst chip also sold above.
Of course, thats why i asked about the chips. the stock ones are too small and need UV eraser which I dont have.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
The1
Posts: 4814 Joined: Mon Jan 04, 2010 10:23 am
Post
by The1 Wed Aug 06, 2014 8:49 pm
would these not work on VN-VR memcals though being 32pin? You would require 28pin chips? I did have some 512 ones at one point, I could ask again and see if I can get more if there is demand.
