VN V8 wiring diagram

[vlad01]

anyone know what year got this plug change for the vn-vs 5L dizzy?

this is what the loom takes.



but I need to cut it off and add this plug. changing the dizzy is not an option, engine will have to be removed to do that lol. No room on this conversion, I felt the plug was suss but couldn't see what was going on until I got a phone and torch in there to take a pic, seeing the plug was different. No wonder I was getting no ref signal

If anyone has one of these plugs ↓ let me know.

[delcowizzid]

Is that a vt dizzy with 4 wires in the car if so it's gotta come out to swap the sensor I think

[HQ355]

That's a VN dizzy with the square connecter, the rounder one is a VP - VS one, VT a totally different to those to and bigger

[HQ355]

Motor wouldn't have to come out, worst case would be rip inlet off, that's not that bad a job, but plug swap much easier

[vlad01]

Motor wouldn't have to come out, worst case would be rip inlet off, that's not that bad a job, but plug swap much easier

oh right, forgot about the intake.

The round one is vn series 1 loom coz it had the old school AMP injector plugs with boots and grey PVC sleeves. square one looks newer to me.

Also the round plug looks like those used on late 70s-early 80s merc with K-jetronic and D-jetronic from late 60s

[vs ss]

oval plug vn-vp s1
Square plug vp s2-vs

[vlad01]

oval plug vn-vp s1
Square plug vp s2-vs

thats what I thought. Anyone got one?

[vlad01]

We been looking everywhere for this connector, even in the states to no avail.

Must be rare type of connector.

[Dylan]

I brought the later type from my local Burson a few years ago.

[vlad01]

not to worry, customer found an adapter on ebay lol.

i spent ages on there myself only able to find the trigger sensors not the plugs.