Dyno tuning - locking transmission in gear

[The1]

should just need to 0 the 3-2 downshift scalar, dont bother with shift tables as your in manual mode. set the TCC lock unlock to 25/30 if you want it locked or set both to max if you want it unlocked. If you run it locked just check your slip RPM before getting into it to hard, depends what condition it's in.

[hoosedamoose]

What ive found to work, set the powermode upshift and downshift tables to 0

set the detent mode scalar in the automatic section to 0. should command what ever gear you want at WOT.
this is what works on my vs, not sure if VT is the same.

when back in economy mode, its as per normal shifts again.

[The1]

yeh the flash pcm's seem a little different to standard memcal ones.