Tune for vn v6 dirt circuit car

[Dirt_vn]

Hey what's up I'm new to this ecu tuning I race a vn v6 and looking at a custom tune/ tuneable ecu if someone on here could point me in the way to go about it and help me out would be grate what I'm looking at is a 98 octane tune and still be safe it's got basic mods 65mm throttle body it's got pacemaker extractors

[VL400]

If you are wanting to setup your own RT ECU for tuning then you can use these two items from antus...
NVRAM - http://pcmhacking.net/forums/viewtopic.php?f=14&t=3612
USB Comms - http://pcmhacking.net/forums/viewtopic.php?f=14&t=3613

Gives you full tuning and high speed logging on the factory ECU.

[Charlescrown]

Your probably in the same boat as me and can only do logging at the track? Stick with the delco theres so much helpl available on this forum. I use VL400's data logger and tune with Tunerpro. Never used the Mvram so can't comment. Might help if you let people know wher you are.

[Dirt_vn]

Sorry should have said I'm from sa I'm new to the tuning side of things is there some one on here that can install the hardware into the ecu and is there a wiz with tuning to give me a good base tune to work off and is the program's easy to use for a noob?

[VL400]

The FAQ has some good links, you would be using 12P. There are some logging and tuning guides, you can download TunerPro and the 12P zip to have a play.

FAQ: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396