Quick question,
Can a 'bricked' flash ECU still by used if you put Kalmaker on it?
Cheers,
Braydon
Can a 'bricked'flash ECU still be used with kalmaker?
-
Brados
- Posts: 34
- Joined: Tue Jan 25, 2011 4:59 am
- cars: VY Manual Ute
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Can a 'bricked'flash ECU still be used with kalmaker?
Is that a physical thing - does it physically replace the flash chip on the circuit board? If it does, probably yes. If no, then no.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
0081(2)
- Posts: 149
- Joined: Wed Oct 31, 2012 8:59 am
- cars: VY commodore supercharged V6
- Location: Sydney
Re: Can a 'bricked'flash ECU still be used with kalmaker?
I don't believe that with flash pcm there are any hardware mods for kalmaker
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Can a 'bricked'flash ECU still be used with kalmaker?
Then you would need a way to flash to the chip not via ALDL to get kalmaker on to it, and that would be the same process as putting factory code back on it, and replacing the code on the flash chip with factory or kalmaker would both unbrick it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
krusty
- Posts: 572
- Joined: Wed Jan 27, 2010 11:45 am
- cars: VY Calais guzzler, Toyota Corolla almost hybrid
- Location: Melbourne, VIC
Re: Can a 'bricked'flash ECU still be used with kalmaker?
Kalmaker can run flash no worries. For mafless you may want to swap to a VT-VY L67 memcal pcm