GM Reverse Engineering

[The1]

well ive taken the plundge to buy a chinese tech2, ill be having a play at some point on the VX Berlina Wagon

[Tazzi]

well ive taken the plundge to buy a chinese tech2, ill be having a play at some point on the VX Berlina Wagon

Good to hear

[Tazzi]

Sooo Im moving into attacking the VT/VX range. But I need some ALDL logging to get me started!

Any volunteers to do some basic mode 1 table reads so I have some valid responses to start spamming at the tech2?! None of the requests are bad/dangerous, just simple "read only" stuff like the tech2 does.

What Im after exactly, is frames from the cluster,Airbag,ABS,Radio,BCM and maybe climate control and PIM if anyone has them. Just need to send the messages off using the Delco tool v1.50 (think its up to that version).

So I need tables 0 to 9 (Not all will responds back!):
(VT only) Airbag(FA): FA,57,01,00,XX
FA,57,01,01,XX
FA,57,01,02,XX
FA,57,01,03,XX
FA,57,01,04,XX
FA,57,01,05,XX
FA,57,01,06,XX
FA,57,01,07,XX
FA,57,01,08,XX
FA,57,01,09,XX

(VX only) Airbag(FB): FB,57,01,00,XX
FB,57,01,01,XX
FB,57,01,02,XX
FB,57,01,03,XX
FB,57,01,04,XX
FB,57,01,05,XX
FB,57,01,06,XX
FB,57,01,07,XX
FB,57,01,08,XX
FB,57,01,09,XX

(VT/VX) Cluster(F2):F2,57,01,00,XX
F2,57,01,01,XX
F2,57,01,02,XX
F2,57,01,03,XX
F2,57,01,04,XX
F2,57,01,05,XX
F2,57,01,06,XX
F2,57,01,07,XX
F2,57,01,08,XX
F2,57,01,09,XX

(VT/VX) BCM(F1):F1,57,01,00,XX
F1,57,01,01,XX
F1,57,01,02,XX
F1,57,01,03,XX
F1,57,01,04,XX
F1,57,01,05,XX
F1,57,01,06,XX
F1,57,01,07,XX
F1,57,01,08,XX
F1,57,01,09,XX

I dont have the other device ID's for the other modules yet, only just dragging the tech2 out now to get them. But cant open any of the menus without some valid data to go off! Any help is appreciated guys!

[0081(2)]

I cant help with the VT/VX but if you need anything for a VY im happy to help out.

[Tazzi]

I cant help with the VT/VX but if you need anything for a VY im happy to help out.

Cheers mate, my vy has been the guinea pig for that range!

[Tre-Cool]

I cant help with the VT/VX but if you need anything for a VY im happy to help out.

Cheers mate, my vy has been the guinea pig for that range!

if your up for a drive, your more then welcome to come to my place and plug into my dads drag car here. it's a vt series 2. no stereo but it still has all the other shit plugged in still. even the remote boot open works off the key. lol

also have his VU ss too.

[VX L67 Getrag]

VT & VZ commands & ignition done & PM sent!

[Tazzi]

VT & VZ commands & ignition done & PM sent!

Ah brilliant! Thankyou!

Noooowww, all thats left is a VX...

[VX L67 Getrag]

I'd be 99.9% sure the VX will respond identically to a VT seeing it has all the same controllers used except for the engine & you weren't after responses from that but when a VX comes I'll do it for that also unless someone beats me to it!

I know The1 owns a VX I think.

[Tazzi]

I'd be 99.9% sure the VX will respond identically to a VT seeing it has all the same controllers used except for the engine & you weren't after responses from that but when a VX comes I'll do it for that also unless someone beats me to it!

I know The1 owns a VX I think.

Yeah some are, but some arent. Its really just the "lengths" of each message I need since thats all the tech2 really wants... but it doesnt tell you if it doesnt like the invalid frame hence so much easy with start with some good fresh messages.

...Guess who just had a pm sent to them *cough* The1 *cough*