Tazzi wrote:Hmmm.... not sure why it freezes up? I think its because of the way bluetooth works.. its "slower" as Iv found with testing. The "auto detect" runs through each comport really quickly to identify if it is valid. It also runs through all main baud rates.. which might be why it froze up?
it did the same on a usb and Bluetooth unit. once I unticked it, they both worked.
Just a note to all if it doesn't connect on the first attempt for the reason of not getting the vehicle details & then you try & re-connect it will say can't find elm device, this is because it's already tried going to hi speed mode & the ELM either needs to be unplugged from the USB or you can then just select 115200 as the speed & it will connect!
Tazzi wrote:Hmmm.... not sure why it freezes up? I think its because of the way bluetooth works.. its "slower" as Iv found with testing. The "auto detect" runs through each comport really quickly to identify if it is valid. It also runs through all main baud rates.. which might be why it froze up?
it did the same on a usb and Bluetooth unit. once I unticked it, they both worked.
even did my test seed unlock on an e38 ecu.
Alright, as long as its working. Each device will behave slight different to one another!
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Had a box full of bits and pieces rock up yesterday, now have:
-VZ BCM
-VZ PIM
-VE ECU
-VE BCM
-and some other bits and bobs.
Hopefully.. most of the diagnostics for the VE occurs on 11bit CAN and not single wire gmlan.
Can also take the mystery out of this shocking BCM/PIM/ECU linking procedure. But from what I hear, the hardest thing to find out is the IMMO code which is needed to lock everything together.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Iv found I had a.. fairly silly mistake.. I had the LS1 engine controls update commented out.. so those were always stayin zero! Thankyou to those who pointed it out! ChangeLog
-Fixed LS1 controls update
-Fixed False antivirus positives (a little bit)
-Better support on more laptops
Please download the latest copy from the link below:
*EDIT
SEE FIRST PAGE
Last edited by Tazzi on Fri Jan 09, 2015 8:19 am, edited 2 times in total.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
can you add the capability to log to a text file for the seed key finder? mainly so if the computer reboots etc, you can find the last key and continue on.
Tre-Cool wrote:can you add the capability to log to a text file for the seed key finder? mainly so if the computer reboots etc, you can find the last key and continue on.
Great Idea! Will do.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Charlescrown wrote:Anyone had any luck downloading the latest version. Looks like the link is broken Tazzi.
Sorry mate, forgot to ad the ".com" in the link Should be working now
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
