Engine VIN-RPO Codes

For non EFI mechanical discussion
Post Reply
immortality
Posts: 3676
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: Engine VIN-RPO Codes

Post by immortality »

Contact the user 88GreenVN on the Just Commodores forum, he has lots of VIN info from VN-VS. In fact he tracked VN builds and has a huge spread sheet.

He has gone through some major life changes of late and is making a fresh start so I don't know if he's still has all the info but it can't hurt to try.
Top
User avatar
antus
Site Admin
Posts: 9002
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:
Contact antus

Re: Engine VIN-RPO Codes

Post by antus »

Holden202T wrote:I thought it was 05 had the LS1 and 06 had the 6Ltr .... but it might have been different in the crewman too :)
That is what carsales is telling me now, but that might be the way they have carsales set up. Will have to find some vins and check again. I have a mate who can look a certain amount of them up for me.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Top
vs ss
Posts: 590
Joined: Thu Nov 03, 2011 7:57 pm
cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1
Location: perth wa

Re: Engine VIN-RPO Codes

Post by vs ss »

Holden 202t you are right.
Because the new emission law came in in2006 the ls1 was not going to meet,so they dropped the 6l in the last of them instead of stuffing around with the ls1 anymore as it's time was just about up for use in new Holden's anyway.
Top
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:
Contact Holden202T

Re: Engine VIN-RPO Codes

Post by Holden202T »

that and it was a test bed for the VE driveline.
Top
Post Reply

Return to “Engine/Transmision Mechanical”