Hey guys can I just stick a set of 777 in my ecotec
And put the pressure up a touch? If there is alittle tuning
Involved I can work the kinjflow can you point me I. The
Right direction.
Cheers, happy christmas
Bosch 777 in ecotec
-
Fireblade.954
- Posts: 72
- Joined: Wed Jul 11, 2012 9:53 am
- cars: ke70 corolla v6 ecotec powered. t5 manual
- Location: Gold Coast qld
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Bosch 777 in ecotec
If you can calculate the old flow rate and the new flow rate and treat them all as %, then you can adjust the flow rate by the same %. You should also adjust the injector dead time (I dont have specs for that, you'd need to research it). Ideally you'd have a wide band connected and can use that to adjust the inj rate for best results.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
immortality
- Posts: 3820
- Joined: Thu Apr 09, 2009 2:31 am
- cars: VS,VT,VX,VE
Re: Bosch 777 in ecotec
If you haven't already got a set contact The1 (on this forum). He does injector reconditioning with a full test sheet to suit both 3 bar and 3.5 which will take out a lot of the guess work.