DELCOS NEW RIDE

Post Your Delco Powered Ride Here
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 4:54 am
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA

Re: DELCOS NEW RIDE

Post by VL400 »

Pin D3 is the injector driver ground while pin D1 is internally tied to D2 (TPS and CTS earth). The ground wire on D2 is significantly smaller than D1 so might have been a problem carrying the extra current and likely also causing TPS and CTS to be pretty unstable.
Top
User avatar
delcowizzid
Posts: 5709
Joined: Sat Feb 28, 2009 10:38 am
Yahoo Messenger: [email protected]
Location: Wellington NZ

Re: DELCOS NEW RIDE

Post by delcowizzid »

vb just got off the dyno higest run spiked 346rwkw averages out around 330rwkw on 21 psi 303rwkw on 19psi .as we added boost the max hp rpm got lower and lower im guessing some part of the setup is starting to back up flow potential time for heads and massive hx52 turbo with some new manifolds
[youtube]https://www.youtube.com/watch?v=LSuzQayDkt8[/youtube]
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Top
User avatar
delcowizzid
Posts: 5709
Joined: Sat Feb 28, 2009 10:38 am
Yahoo Messenger: [email protected]
Location: Wellington NZ

Re: DELCOS NEW RIDE

Post by delcowizzid »

couple of sheets
Kw Nm.JPG
Fueling.JPG
You do not have the required permissions to view the files attached to this post.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Top
immortality
Posts: 3820
Joined: Thu Apr 09, 2009 2:31 am
cars: VS,VT,VX,VE

Re: DELCOS NEW RIDE

Post by immortality »

Damn, not bad for a high mileage stock long block V6 engine., gotta be around the 600hp at the flywheel.

What boost did you guys run on the 10.8/127mph run?
Top
User avatar
delcowizzid
Posts: 5709
Joined: Sat Feb 28, 2009 10:38 am
Yahoo Messenger: [email protected]
Location: Wellington NZ

Re: DELCOS NEW RIDE

Post by delcowizzid »

21psi it went on the dyno just how it came off the trailor.around 550 engine hp 450 at the tyre not bad for this old thing its around 4 years in the bay now and its had a nasty vibration ever since we got the auto and flexplate balance was a cock up was shaking like shit in the bay till it came on song and smoothed out.the sound fully loaded in the dyno room OMG loud and mean.will be going back after some mods we want 400rwkw now lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Top
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 4:54 am
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA

Re: DELCOS NEW RIDE

Post by VL400 »

Sounds awesome and making some crazy power for what that engine has been through! Nice work :thumbup:
Top
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: DELCOS NEW RIDE

Post by Holden202T »

nice results :)
Top
User avatar
delcowizzid
Posts: 5709
Joined: Sat Feb 28, 2009 10:38 am
Yahoo Messenger: [email protected]
Location: Wellington NZ

Re: DELCOS NEW RIDE

Post by delcowizzid »

test fit of the cage
cage in.jpg
You do not have the required permissions to view the files attached to this post.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Top
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: DELCOS NEW RIDE

Post by Holden202T »

that's in the starlet ?
Top
User avatar
delcowizzid
Posts: 5709
Joined: Sat Feb 28, 2009 10:38 am
Yahoo Messenger: [email protected]
Location: Wellington NZ

Re: DELCOS NEW RIDE

Post by delcowizzid »

Vbs New cage lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Top

Return to “Members Rides”