Spark only bin to turn 808 into programmable ignition ecu
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Spark only bin to turn 808 into programmable ignition ecu
someone had the idea of using the 808 as an ignition only controller the other day and i thought it is a good idea.obviously still need a vss,map,coolant temp sensor maybe even inlet air temp and and rpm inputs which would come from the spark module anyway.anyone have any thoughts.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- antus
- Site Admin
- Posts: 8272
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
You could cut down the code to do that, although it will work with current code by just not connecting the injectors.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
yeah i thought that may be the case didnt know if it might pack a mental having no injectors or not.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
Hi guys, i'm a novice to ecu tuning.........learning a bit by way of these forums, anyhow......i am pretty sure this is exactly what the stockcar boys use on there 3800's, still using the ignition side of things but they run a carby for fueling
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
yeah a lot of clesses arnt allowed injection so it would be a good way to get round the issue.over here we just had some rules changed to allow vn-vp's to run injected in the saloon classes which is good opened up the classes to newer vehicles .
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
Yeah man thats me s1 VN Production Saloon amongst the hordes of 'pullers'.......fwd jappas
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
yip we have them track rooters too i dont see the fun in driving a front wheel drive on an oval just put ya foot down and turn must suck.they dig trenches in the tracks too.myself ide rather be out there drifting properly in the old vn like you.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
yeah real driving
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 345
- Joined: Sun Apr 05, 2009 1:07 pm
- cars: VN V6 Production Saloon
- Location: Gisborne NZ
Re: Spark only bin to turn 808 into programmable ignition ecu
Yeah thanx guys.....too true.......the bloody things keep winning though, which i intend to adress 4 next season. Only one race this season was won by a RWD.
Seems we getting way of topic i thinks
Seems we getting way of topic i thinks
Build it, Race it, Break/Bend it ; Repeat.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Spark only bin to turn 808 into programmable ignition ecu
bah maybe ill start a saloon car thread in the general tuning section i have a few good bins here for saloons couple of dynoed ones somewhere have some good pointers on tuning for oval dirt circuits done a few before for people ill start a thread in a day or so if you dont beat me too it.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem