TunerPro RT data errors

[The1]

i just went and double checked all the old enhanced versions, but echo has been on always on all models.

[j_ds_au]

i just went and double checked all the old enhanced versions, but echo has been on always on all models.

Which is why their (well, only tried the VS one) data looked good.

Joe.

[Tazzi]

i just went and double checked all the old enhanced versions, but echo has been on always on all models.

Iv never had dramas except for the VS currently on bench.
Could have been only the VS that was affected?

The VU_VX_VY V6 flash ecu defition files work great. The none enhanced adx files can take a few hit'n miss to get it synced up. But your enhanced version literally worked flawlessly a good 15times in a row!

[The1]

nar i checked all previous versions of enhanced adx for vs and they all have echo on. Perhaps thinking of the old innovate or 14.7 adx's i used to have ages ago which they didn't at one point perhaps.

Yeh i havn't been able to get vx/vy to fail to connect, it kicks the bcm off everytime and connects without error. though it does have a break on fail/connect with chatter.

Perhaps try the same with the vs n/a if you can.

[j_ds_au]

Just to clarify any confusion, it was the files "Vs V6 engine and trans 1.09-tp5 - Credit to Jayme.adx" and "Vs V6 engine and trans 1.10-tp5 - Credit to Jayme.adx" that didn't have the Echo option set. Hence the bogus data displayed by TP RT.

Joe.

[Tazzi]

Just to clarify any confusion, it was the files "Vs V6 engine and trans 1.09-tp5 - Credit to Jayme.adx" and "Vs V6 engine and trans 1.10-tp5 - Credit to Jayme.adx" that didn't have the Echo option set. Hence the bogus data displayed by TP RT.

Joe.

To clarify that, the original troublesome file is: "Vs V6 engine and trans 1.07-tp5.adx" which still has the echo option off. Attached is the original files.

The v1.08,1.09 and 1.10 were all attempts in fixing the timing issues. Which, really was the echo! (and maybe the timing a little! )

[The1]

ok cool, so the current enhanced ones are all good?

[Tazzi]

ok cool, so the current enhanced ones are all good?

Works perfectly!

[The1]

awesome

[ralcool]

I just yesterday tried the new adx for $51 VS supercharged.... no more data errors!

Previously I was getting a massive number of error counts, nothing I did would make a difference. But it did manage to log enough to adjust things.
My system uses the ch340 driver/serial chip.

I actually thought I had a earthing problem or something in my wiring, or my dodgy daisy chain of usb-rs232-aldl bits.

Thanks 'The1' I use both your enhanced code and adx for the VK T5 L67. No wideband yet.. but soon.

Cheers.

Sean.