Mitsubishi anyone????

[DieselBob]

Hey
I've just had a 2001 lancer delivered for one of the kids.
Ce 4G93 Engine Manual
Does anyone know if there's any DIY hardware to hook Tunerpro up to these things.

[Charlescrown]

I have played a bit with Mitsubishi and have a 4G63 EVO4. They need a 18 volt supply to activate read write from the ECU. This might vary with some models. The software is ECU flash a free download and the interface I use is a Tactrix Open Port 2. Go have a look on their website. Also have a look at the Evoscan website for lots of good info. He has a great software package that will do all that a MUT3 can and it's only $25 for a lifetime software.

[DieselBob]

Thanks for that.

I have access to a MUT3.

I had a quick look at Evoscan and ECU Flash.
Tactrix Openport came up to.

the people here are a great source of knowledge and are willing to help.
I didn't expect there to be any Mitsu feedback

So thanks again

[Charlescrown]

I might be a Mitsu lover but I used a Delco to log it as well as the Taxtrix.