Help with burning to an SST27SF512
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: Help with burning to an SST27SF512
i have to do this with my supplies, i give up random chips in each batch to do a 1000cycle script test on them and make sure there upto the task. They 28pin chips are getting harder to find in old stock.
-
zspanners
- Posts: 65
- Joined: Mon May 04, 2009 3:44 am
- cars: Zephyr mk 1,2,3
Nissan R33,R34,s13 RB20DET
Commodore VN,VR
Zephyr 6 Cyl with Delco 808
Re: Help with burning to an SST27SF512
They did not come from Ebay , but from a local supplier and are supposed to be from Moates.
The supplier is going to sort it out , however much time has been lost in tacking the issue down.
Thanks to everyone for input to help track this down.
Zspanners.
The supplier is going to sort it out , however much time has been lost in tacking the issue down.
Thanks to everyone for input to help track this down.
Zspanners.
-
j_ds_au
- Posts: 387
- Joined: Sun Jan 25, 2015 6:21 am
- Location: Sydney
Re: Help with burning to an SST27SF512
Yeah, for current IC production you'd have to use the PLCC32 version (GLS27SF512-70-3C-NHE) with something like the following adaptor (beware, pins may be too thick, in which case you'd have to replace them) : http://www.ebay.com.au/itm/281672748217The1 wrote:They 28pin chips are getting harder to find in old stock.
Joe.