202 LJ Torana Conversion

[HQ355]

Nice job, bit of work there

[Holden202T]

yeah I agree

[v6bucket]

Nice setup.
Can I get a throttle body injectors big enough to feed Methanol?

[jenko]

some of the 5.7 litre v8s Use 2 so 3 of those should be enough for the 202

[delcowizzid]

the 9 port is a bit of an issue with batch fire due to the shared inlet ports and a couple of those ports being one right after the other in the firing order so one shared port gets 2 gulps with only one injection event i would be looking to go sequential

[Jayme]

it becomes less of an issue when you choose TBI mode on your memcal, as it then fires the injectors every spark reference pulse and evens it all out.

[v6bucket]

At this stage, I'm going to run just the distributor & investigate throttle body injectors. I was just looking for an easier way to run between petrol,E85 & methanol.

[nips060]

I seen these on the internet, it might be something to look at. they use GM stuff and still look like SU's

http://www.pattonmachine.com/TBI-Main.htm

[v6bucket]

I could make something like that, just got to find the right injectors, they aren't as plentiful as the injectors used in current engines.

[nips060]

The Nissan sr20 injectors look like they fit in some housing should have different size injectors available.
Or they do "hose on injectors" if you have the gear to make an housing?? Should be a walk in the park