ALDL Logger V2

[VL400]

Yeah that was a recent suggestion, and works really well on the constant powered ALDL port. Can just leave it connected all the time.

[delcowizzid]

auto record save has been working good for me was handy to see the map hose blow off the vb mid pass.i was stopping the recording after each pass manually just incase but the couple of times the car was shutdown before stopping recording it did save a good log.was handy as at the drags just sitting in the glovebox doing its thing LOL showed us leaving the line on 3.5 degrees of timing due to false knock (stupid worn stock mounts and dump pipe attached to the bellhousing LOL) definately be gaining some 60 foot back with some timing LOL

[VL400]

Excellent, making good use of it in the VB for some extra data

[v6bucket]

I've upgraded the V2 Logger to the latest firmware, as I haven't used it it for too long. I played a log that I done yesterday, when playing it back with the VE table on the laptop, the bubble trace only moves up & down the 100kpa column, it appears correct with the spark table. What do I have to change? 12P_808A.adx

[VL400]

Its the baro change in 12P V112 causing it.

The 12PV112 VE table has Baro as the MAP axis data, it was changed so baro compensated MAP could be used for the lookup. You can change the XDF so the VE table X axis has MAP instaed of Baro for the data type - thats how V111 was.

[v6bucket]

Thanks, that fixed the laptop, but the "View/Edit Parameter XDF Info" isn't highlighted on my pc. How do I activate it? I have both setup the same except the pc has TP5 running from an external hard drive.

[VL400]

Not sure on that issue, sounds like a TunerPro forum question - or try reinstalling TP on the PC on its internal drive.

F2 is the shortcut for editing an item, see if that works.

If all fails use the XDF you modified on the laptop.

[VL400]

Have updated the first post (http://pcmhacking.net/forums/viewtopic.php?f=14&t=3540) with the instructions and firmware for adding an accelerometer internally to the logger

Some discussion here .. http://pcmhacking.net/forums/viewtopic. ... 170#p53882

[kojab]

Can we use the accelerometer feature with message 6 in the Logger2? It's working great in the 12P_3BarAux.adx

Going to fit a sensor to my gear stick to find out why its jumps around erratically.

Love your work VL400.

[VL400]

Yeah works with any logging, basically becomes 6 analog and 2 digital inputs logged on top of whatever message config you have - be that message 1 or 6 or custom or via a PC.