KINJFLOW setting $11
-
Charlescrown
- Posts: 2076
- Joined: Fri Aug 05, 2011 9:58 pm
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
KINJFLOW setting $11
Just looking through my program and wondering why the KINJFLOW is set at zero. Seems a strange setting to me but the program is a std HSV with just timing changes.
-
Jayme
- Posts: 2585
- Joined: Sat Feb 28, 2009 10:59 pm
- Location: North Coast, NSW
Re: KINJFLOW setting $11
there are a few different $11 masks... are you sure you have the right one? can post the bin file up?
-
Dylan
- Posts: 3364
- Joined: Mon Aug 02, 2010 8:35 am
- cars: VR Commodore V8
Re: KINJFLOW setting $11
Sounds like a mismatched xdf?
Copy the hsv ve into a stock 11P bin and your timing map and run that.
Copy the hsv ve into a stock 11P bin and your timing map and run that.
-
Charlescrown
- Posts: 2076
- Joined: Fri Aug 05, 2011 9:58 pm
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: KINJFLOW setting $11
Problem solved thanks to Kojab. The address in the XDF was wrong.