hooking up to a vs

big cams · Post by **big cams** » Wed Aug 19, 2015 8:55 am

20150819_181931.jpg

is this what u mean?

Dylan · Post by **Dylan** » Wed Aug 19, 2015 9:00 am

That's it. The earth you wont need to join it to ground the ecu does that.
I remove that wire from the ecu plug and fit my own one temporarily.

On my own car I have a wire coming from the NB ground pin and the wideband pin and have them on a plug.
And another 2 wires (ground and 12v supply) going to a 4 pin plug.

Whenever the NB is in I refit that ground wire, if the wide band is in I fit that wire to the NB ground pin.

Post by **Holden202T** » Wed Aug 19, 2015 10:57 pm

if you want to learn about flex tables, have a look in the $11/12P tuning guides. (links in my signature)

big cams · Post by **big cams** » Sat Aug 22, 2015 11:10 am

so it dose not matter what pin i use for earth c2 or c3? can u draw up a pic of what i have to do please

Dylan · Post by **Dylan** » Sat Aug 22, 2015 12:17 pm

Use whatever the narrow band earth's too.

big cams · Post by **big cams** » Fri Sep 04, 2015 3:42 am

is this what you mean

IMG_20150903_065729.jpg

Dylan · Post by **Dylan** » Fri Sep 04, 2015 5:02 am

Are you looking at the auto ecu D8 isnt used for wideband.

big cams · Post by **big cams** » Thu Sep 17, 2015 12:29 pm

that's what that the 11 p over view says its d8. can u just draw a picture of what I have to do please

Post by **Jayme** » Thu Sep 17, 2015 11:44 pm

put wideband linear output + to D8, put wideband linear output - to C13 (this is the o2 sensor earth) and done.

big cams · Post by **big cams** » Wed Sep 30, 2015 9:13 pm

ok thank u so much mate

hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs

Re: hooking up to a vs