With help from Holden202T the motor is in the engine bay, just not fully attached. Engine mounts are giving us grief but will be sorted soon. Custom sump was re-modified to suit L67, some meat taken off the engine block and bell housing.
Wiring loom stripped of ancillary shit we don't need. From this:
To this:
Surge tank and fuel pumps in...
Last edited by firebug on Fri Jul 14, 2017 1:14 am, edited 1 time in total.
Turns out we had all sorts of trouble fitting the new engine in. The 4L60e if quite a bit fatter than the T700 so out it all came and took to the tunnel with a grinder...
After much discussion we decided instead of fabricating in a VR Commodore tunnel Holden202T had spare, we should try and modify the original tunnel and see what happens. The gearbox mounts were the main concern if we cut out the old, so we bolted up the cross member back in place for support and to maintain its position while the modifications to the original occurred.
Original tunnel
Cutting
As a result, we sliced down the middle of the tunnel and in a few places across the front to make it wider and taller. There is also more room now for the intake manifold and coolant pipe...
Welding back up
Then I ran out of gas so I'm off now into town to get a bigger cylinder.
Last edited by firebug on Fri Jul 14, 2017 1:17 am, edited 1 time in total.
So inside all but done other than the replacement section for the B&M shifter to mount onto, the old setup was a hacked up setup that was not very sealed and certainly not the most rigid. We are fairly confident that will no longer be an issue with the new section we've started to weld in but I hadn't taken a photo of.
Good project and nicely done so far. The buick v6 often enough ends up in geminis but this has become a fair bit more interesting. Keen to see how it progresses from here. You've certainly got the right person helping make things fit.
agreed, awesome. i remember a friend had one of these years ago - blue coupe with a VR v6 and 5 speed in it. he loved it to bits. this will hammer badly with the super v6 in it. awesome stuff
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.