Injector flow rate

General Tuning Questions And Discussions
Post Reply
User avatar
Dec_head
Posts: 505
Joined: Thu Dec 17, 2009 10:33 pm
cars: VR Calais

Injector flow rate

Post by Dec_head »

I am changing to blue top bosch 775 injectors from the standard v8 injectors just wanted to double check this is right 0.13 grams a second for blue ? from 0.15 standard
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Injector flow rate

Post by Jayme »

blue tops are 0.116 or Hex 7D
vn5000
Posts: 551
Joined: Fri Jul 17, 2009 2:11 pm
cars: vn v8 commodore
Location: GOLD COAST QLD

Re: Injector flow rate

Post by vn5000 »

Be carefull with tuner pro as it doesnt have very high resolution with inj rate -make sure you type in 7d.
User avatar
antus
Site Admin
Posts: 8261
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Injector flow rate

Post by antus »

Thats not an issue with tunerpro. If its not 3 or 4 digits after the decimal place then edit the xdf itself and turn the precision up some, then you'll be fine.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Dec_head
Posts: 505
Joined: Thu Dec 17, 2009 10:33 pm
cars: VR Calais

Re: Injector flow rate

Post by Dec_head »

Ok now i am confused :roll:
I opened a tune that uses blue top injectors standard the 5.7 litre vs and inj flow was 0.13 in tunerpro
And in ose 12p it was 0.15 so i just figured it would be as easy as changing it to 0.13
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: Injector flow rate

Post by Jayme »

injector rate is based on cylinder size AND injector flow...
in a 355 its 0.13 (probably not exactly... add a few more significant digits to your definition and get it exact) in a 304 its 0.116
User avatar
Dec_head
Posts: 505
Joined: Thu Dec 17, 2009 10:33 pm
cars: VR Calais

Re: Injector flow rate

Post by Dec_head »

ok thanks for the help going to fit them tomorrow just wanted to be sure
Post Reply