ALDL Logger V2

[Dylan]

Thanks men. So if I done a get cal then mod that. What should I save it as? Tuner Pro doesn't give me the option for a .cal file.

[Jayme]

file > save bin as. change the save as type to say "all files (*.*)" then change the file extension to .cal and hit save.

note, this doesnt make a cal file.... it just names it .cal, so the original file you opened must be a 7kb cal file.

[Dylan]

Thanks mate I'll have a play at home on my own car. Got the job done the other night so that's all good.

[Gareth]

Out of interest, was it a speedway car you where tuning?

[Dylan]

Yeah mate V6 wingless. No dyno time just track.

[kojab]

Added fuel pressure to loggerV2 V1.13. Used one of the Aux inputs 0 - 5v but could not get fuel pressure readings to display on logger's screen.
Chart display screen is working but digits underneath remain at 00.0.

XDL played back with TP on laptop, displays fuel pressure ok.


Version 1.12 works fine but not V1.13. Anybody else had this?

[Jayme]

the logger is verrrry finicky with equations? have you tried refomatting the equation and checking the number of decimal points and high/low range?

[Holden202T]

yeah logger needs basic calcs, cant remember exactly what VL400 told me, but I think you need to try and avoid things like brackets and stuff like that

[immortality]

Yeah, logger doesn't follow BEDMAS rules. Only simple calcs.

[kojab]

Jayme you were right about it being verrrry finicky and Holden202T was spot on about the brackets. What surprised me is with firmware V1.12 brackets can be used but not with V1.13. Had me stumped until you guys helped out.

immortality I have not heard the term BEDMAS rules. Will check that out.

Thanks