265 Hemi to efi

[Dylan]

That's the one to get. Check out dark wire they're an australian agent in WA. I got mine from there and my UV eraser. No problems and well priced.

[heff0018]

Thanks Dylan, I have been searching for dark wire and can't find anything.

[Gareth]

Try here

http://www.darkwire.com.au/

[Dylan]

To quick for me this hour of the night biggvl!

Anyway here's my effort http://www.darkwire.com.au/html/gq-4x_u ... ammer.html

[heff0018]

Ha, what a different a space makes. I tried all types of searches using dark wire plus the product name, burner, electronics, WA all sorts but not darkwire.

Thanks, that is cheaper than buying from the manufacturer in $US and getting here.

[heff0018]

Just a .atter of re burning not replacing it. I've had mine do it a couple times for unknown reasons.
Will flash tool connect? Switch to bank B and see if TP will connect.

Yes both flash tool and TP connects on bank B. Burner coming, and I have replaced the jumper so it's back on bank A. Is there any tricks to use the burner? I assume you plug in the NVRAM to the burner and copy over a good bin file. Cheers

[Dylan]

Yes you burn a good bin. But it needs to be stacked. So stack a stock 12P bin 4 times with tuner pro and burn the stacked.bin file.

From memory you are running 12P 1.11?

[heff0018]

Yes 12P v1.11, . Ok will have to check up on stacking. Cheers

[Jayme]

the zip file for 12P will have pre stacked 128k bins. just burn any of them on, then put jumper on bank A and use flash tool to flash in your cal, then pull jumper for bank B then flash cal again.

[heff0018]

the zip file for 12P will have pre stacked 128k bins. just burn any of them on, then put jumper on bank A and use flash tool to flash in your cal, then pull jumper for bank B then flash cal again.

Yes found the stacked bin, thanks. So just to clarify, I don't have the jumper on when I burn the bin file.

Sorry, another dumb question. Do I first need to get the CAL from the ECM by connecting on Bank B and using flash tool to 'Get CAL'. Sounds obvious but at this stage of my knowledge I don't know where the corruption is i.e. NVRAM, Bin, CAL, what is actually corrupt.

Cheers