Sorry. I obviously misunderstood the gist of the thread.
I was just going by the first line.
"Is it possible to run a maffless tune on either of the squential 5.0 computers vs s3 or vt"
vs s3 vt maffless tune
-
Monarols71
- Posts: 87
- Joined: Sat Feb 25, 2012 10:10 am
- cars: VS SS Ute
- Location: "Slowbart"
-
matthq2d
- Posts: 4
- Joined: Sun Feb 07, 2016 12:30 am
- cars: Lots
From lincoln to oldsmobile and hesps of holdens and commodores
Re: vs s3 vt maffless tune
Antus. What i want to do is run map tuning with sequential injection.
Is this possible?
Or is it possible to run 2 maf sensors?
Is this possible?
Or is it possible to run 2 maf sensors?
-
vlt304
- Posts: 226
- Joined: Wed Feb 27, 2013 10:46 am
- cars: eh premier sedan v8 vl commodore
Re: vs s3 vt maffless tune
the1 is the man too ask this question it can be done with kalmaker tho if you are in a mad rush
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: vs s3 vt maffless tune
That is correct. Kalmaker for MAP on a sequential PCM (and crusty old dos software with no USB support!) until the1 completes one of his projects to add this feature to the bins here.
If you need greater airflow 2 mafs is not the go, but you can run a larger maf for increased airflow with the1s enhanced. See this thread: viewtopic.php?f=27&t=2518
If you need greater airflow 2 mafs is not the go, but you can run a larger maf for increased airflow with the1s enhanced. See this thread: viewtopic.php?f=27&t=2518
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396