Delco OSE FlashTool V1.51
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Delco FlashTool V1.51
so i need to swap from auto to manual in a vx can i just do a write cal of the manual vx bin on the auto ecu and happy days or nah
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 2906
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Delco FlashTool V1.51
VX-VY V6 flash pcm's are all the same just need to do a write entire & all is good!
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Delco FlashTool V1.51
it wont wipe the bcm-pcm linking writing whole bin?
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
- Posts: 2906
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Delco FlashTool V1.51
yeah I guess it can as there is 2 sections for the link code, if you have the original bin & the 1 you want to change to I can copy it across for you or just disable VATs
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Delco FlashTool V1.51
You can choose to write the EEPROM data that is specific to the vehicle at the end, choose no as a raw bin wont have that data. Do a full get bin choosing not to clear anything before you begin just in case you need the EEPROM data.
If you use a manual bin that is the same program as the auto bin could do a cal write only.
If you use a manual bin that is the same program as the auto bin could do a cal write only.
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Delco FlashTool V1.51
thanks all very much
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Delco FlashTool V1.51
seems to have worked a charm bing bang boom no issues too easy legendary tool
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Delco FlashTool V1.51
I cant seem to install framenet 3.5. i have .net 4.6.1? does this matter? i still cant seem to connect to my vx so this is last resort. have set up text bench and cant connect to that either
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Delco FlashTool V1.51
The later framework is fine.
Re: Delco FlashTool V1.51
Hmmmm ok. That makes 2 flash pcms o can't connect too..VL400 wrote:The later framework is fine.