my ride vt ecotec

[vt3.8lt]

I just loaded up that exact log and for me im seeing the exact symptoms ive been discribing witch is what i see while trying to tune aswell the monitors and dash says 70ish kpa but the table is pegged at 100 or more

[vt3.8lt]

20160326_192459.jpg

[festy]

Yeah it looks fine throughout the log:

11P_MAP2.png

Which ADX item are you looking at? It should be "Baro compensated MAP"
What version of the XDF are you using? Maybe the data item link for that table's MAP axis isn't set up right in your XDF?

[vt3.8lt]

Im using the ose11p v102 2bar map just realised i should update that to the 104

And the xdf is the ose11p v104 .xdf

Maby thats y its showing strange readings

[festy]

Quite likely that'll be the problem!
I'm using 104 here.

[vt3.8lt]

So changing the adx to the v104 only just confused me more it seems to have just made it read at a lower kpa so something strange seems to be going on im goin have to look into the map voltage

20160326_193842.jpg

[festy]

Did you load the 104 XDF as well, or just the new ADX?

[Holden202T]

yeah download 1.04 and use all the files from it, thats the first thing to check, then see if you have the same issues.

[Dylan]

Didn't VL400 migrate your bin to 1.04 a while ago?

[vlt304]

the bin i put on your nvram was 1.04 you will need to load the xdf and the adx for 1.04 for it all to work