my ride vt ecotec

[vt3.8lt]

im not sure man as far as i know they are witch ones should i look into far as i know the inj flow rate would be the main one witch is set right far as i know

[Dylan]

There's dead times and ad on times. I fitted a big set fo a car once and it ran terrible missing and all that untill the correct times were entered.

[vs ss]

Are you sure it's an injector?
If it's been running really rich you probably stuffed a plug or two.

[vt3.8lt]

oh ok cool thanks man ill look into them but i dont know what there supposed to be set to etc

yeah im pretty sure as i pulled the plugs and cleaned them to be sure before running it n it didnt make a differance

[vlt304]

check the basics first make sure you have spark and injection switching(noid light or led test light) then check for compression once the basics are confirmed you should move onto more complex things

[vlt304]

what part number is on the injectors? I hope they arnt Chinese knock off ones they have horid spray patterns and dead times vary heaps

[vt3.8lt]

ill have to see if i can dig up a test light to see if there firing properly but spark is good from what ive seen but the part number for the injectors is 0280155759 and are bosh items

[Dylan]

Google says they're ford motorsport red tops? Bad reputation them I had some once. Probably to small anyway if that's correct.

[vlt304]

http://www.fiveomotorsport.com/ford-rac ... 55759-30lb specs for dead times/latency

[vlt304]

http://www.boschdealer.com/specsheets/0280155759cs.jpg better write up here