needed $5a xdf

[cms5068]

does anybody have an $5a xdf

[VL400]

This thread has some info but there is no XDF. You can use the 12P code if you want, will work in VR or VS and will give you access to every ECU parameter. Can get it here.

[cms5068]

im only new to tunning
so im just trying to get a handle onit all. can i use the 12p to modify my bin or do i need to put a 12p bin file in instead because when i look at my bin file in the $12p xdf i cant make any sense of it

[VL400]

You will need to edit and burn the 12P bin file to your memcal. In standard form the anti-theft is turned off (flag called 'Disable anti-theft module control'), if you enable this by un-ticking it change the anti theft to VS mode using the flag 'VS anti-theft'.

[cms5068]

im trying to use the an $12 bin file with the $12p xdf but the tables seem to be just random numbers

[VL400]

Downloaded the 12P V104 zip, opened the xdf called 'OSE_12PV104.xdf' and bin called 'OSE_$12PV104.bin' in tunerpro and everything seemed ok. The V6 cal file called '12P_V104_BLCD.cal' also looks fine. Tried tunerpro version 4 and 5. What version of tunerpro are you using??

[cms5068]

thank you vl 400 was using the wring bin file thanks for your help