Convert V6 Netres To V8
-
vlad01
- Posts: 8549
- Joined: Mon Oct 08, 2012 8:41 am
- cars: VP I S
VP I executive
VP II executive
VP II executive #2 - Location: Kyneton, Vic
Re: Convert V6 Netres To V8
Can think of it like filling a glass of water. The start of the glass is the bottom.
-
MrWillys
- Posts: 52
- Joined: Fri Apr 11, 2014 12:52 pm
- cars: 1955 Willys CJ5 L98 350
2001 Ford F150
2004 Corvette 6 spd - Location: Reno, NV USA
Re: Convert V6 Netres To V8
Received a memcal yesterday originally reprogrammed from a major company in the USA. There were no 14 or 16 pin chips under the ESC module? The ESC unit was marked M and I was unable to identify it. Can anyone tell me what it origanilly came from?
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Convert V6 Netres To V8
Can you post a pic? It doesnt sound familiar but someone might now.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
MrWillys
- Posts: 52
- Joined: Fri Apr 11, 2014 12:52 pm
- cars: 1955 Willys CJ5 L98 350
2001 Ford F150
2004 Corvette 6 spd - Location: Reno, NV USA
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Convert V6 Netres To V8
The missing chips are the limp home resistors and the cylinder selection. I cant identify the original use but it must be from a vehicle with hard set #cyl so they dont need cyl select or limp home fuel to be configurable from the memcal hardware.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396