Opel corsa rev limit and xdf help, basic xdf added

[delboy]

Thanks mate I will test tomorrow! That makes sense to me.
Anyway heres the map locations Ive found:
00D1 High rpm fuel, usual delco 400rpm steps and factor for ve
0184 Low rpm/idle fuel, as above
03C7 Afr x coolant temp?? factor 0.1 with presicion .1
0443 Afr open loop?
0B38 Spark advance rpm x map, limp mode not sure doesnt seem to use this table
0BEB 91ron Advance, as above
0C9E 95ron as above
0D60 Another advance, not sure but doesnt seem to use it

[ivanovbg]

0B38 Spark advance rpm x map, limp mode not sure doesnt seem to use this table - X*0,3932490-all adwance table
0D60 Another advance, not sure but doesnt seem to use it- 1. emergency
2. trouble
0E1A-Correction Ignition f( Temp. Water ) 12X5
1360-TPS AFR ratio-1X13 ?
03C7-AFR cold
0443-AFR hot
00D1 -injection at part throttle 16X11

[delboy]

Thanks a million mate, I've replied in your thread but have a feeling you might already know what Ive posted!!!

[delboy]

Power enrichment is somewhere just after the main ve tables? 2d table eg 1 x 8?

[ivanovbg]

http://www.bikudo.com/product_search/de ... anner.html this is better than aldl.
I'm not sure if this scheme works http://dox.bg/files/dw?a=1185ecb84d
program work to date on the computer must be replaced in 2009 or 2008
I got ready and I am very pleased
I bought it from here http://www.obd2-bg.com/Opel_Scanner/index.html

[delboy]

Here is my first attempt at an xdf
Could anyone look at it and help, I understand if you change the prog id to AA it will bypass checksum? Is this always at address 08? Is it in my bin?
Also can you 'swap axis' in tunerpro? I'm used to the rpm going the other way if you get me!

[Jayme]

do you mean swap the axis or invert? you can invert either axis in tp5 in the options page

[ivanovbg]

repaired some things
I have more time now
there are two tables for advance 98 & 87
e1a -advance adjustment in water temperature 12X5 ,12 temperature,6 map
correct and add other

[delboy]

Cheers I'll get a look later, the rev limit formula posted earlier didnt work

[delboy]

do you mean swap the axis or invert? you can invert either axis in tp5 in the options page

Yes thanks will try later