VS-VY Enhanced Factory Bins

[delcowizzid]

Seems the car has dropped 2L/100km off the consumption just from flashing in the enhanced bin gone from 13.9/100 to 11.3/100 on the dash readout lol

[The1]

haha nice

[stevedarman]

Hi There, I would like to know should i tune via injector multiplier tables or MAF tables?
and I would be grateful if you can direct some instruction on how to use the MAF xl spread sheet

[0081]

Use the injector multiplier table for fueling changes

[stevedarman]

great thanks
What are the MAF tablet for?

[The1]

as above, use the injector tables. The maf tables are for when changing maf's especially if they have a different response curve. Not to say you can't tune with the maf tables but it makes it more complex and the range of tuning isn't much compared to the 2x multiplier range of the injector tables.

[stevedarman]

Thanks for your fast response and explanation

[stevedarman]

Hi again,
I am having trouble setting up Pin 5 and afr target vs wideband
The info pdf is different to the current adx
I have LC-1 Do i put the formula in the "Equation" line on pin 5 input?
and Do i do anything with the Arrangements line
Also
Do i use wideband vs commanded AFR Multi because i cant see AFR target vs Wideband afr?

[stevedarman]

I have worked it out now
Is it the injector constant Vs mg/cyl Vs rpm table i change

[stevedarman]

Still having trouble
vx s/c hard to get to log data works sometimes
once started it works of any ideas?
using ver 1.2 adx to make sense of data

i think i have just wrecked a chip