Makes me laugh when ebay says:
"Things other buyers bought"... then links me to these useless pieces of crap! The infamous IAT resistor hacks are back!
Love how the OBD2 box can be fitted to a VN Love to see someones face when they realize its not even the right connector!
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
yeah that and apparently it works on a VA Commodore ?
HOW DOES IT WORK?
It will modify any standard ECU system by telling the ECU that the incoming air in the intake system is cold and so advances the ignition by up to 2 degrees and provides more fuelling to compensate, resulting in more power. In many cases fuel economy is increased too. Power is increased by up to 15bhp and torque is significantly increased. It will be more responsive and you WILL LIKE
No matter what the question is, the answer is always more horsepower!
wow look how many have sold.
Im loving there negative feedback:
dodgy, overheated car, cut it open there was only 1 wire in and out no resistor
Better off with a turbo noise maker than this item
didn't make any difference to my audi a3 tdi 140ps. so now in the bin
Piece of junk, tried it in several cars, doesn`t work at all...
Load of old bunkum. Dont waste youre money on this rubbish
Only red light nothing change. no more power,fuel economy,only red light
'Causes pinking' and having to run the car on super unleaded not mentioned!
Made engine management light come on..cost me 75 pounds to sort out
DONT WORK TESTED ON DYNO AND WASTED MONEY ON ITEM AND ON POWER RUN FOR NOTHING!
This is for a Performance plug and drive OBD2 chip tune upgrade,we do the upgrade for VT,VU ,VX,VY , VZ and VE both V6 and V8. Gives up to 35% more power 25% more torque and give better fuel economy. Designed and written by American dyno tuners and manufactured in China as a cheap and easy way to get the best from your car.The chip tune upgrade connects with the OBD2 diagnostic connector, reads the data from the computer from the car analyzes it and creates a upgraded program for the car. When you disconnect the retune computer from you car it reverts back to the original factory settings.The upgraded tune is always within factory parameters and cannot damage your motor or harm your driving style, in fact it increases response times and retunes to your driving style.This upgrade is ideal for v6 3.8 and 3.6 motors where the computer is not able to be upgraded by other means, also works for v8, 5.7, 6 and 6.2 liter motors where you don't want to pay out $800 plus for a dyno retune.The best gains are from where the air intake and exhaust have been upgraded, and you want to take advantage of the gains, but, your std holden computer is not made to be able to give you the gains in its standard form. Not withstanding the standard car still can make great gains, as well as cars with rewritten computers as this retune is done in real time and adjusts to the way you drive. We give a 100% money bank guarantee. KEY word ECU, CPU ,holden computer, holden chip,rechip.NOTE photo is sample only.
I believe the seller is a occasional user on this forum too.....
Love to see someones face when they realize its not even the right connector!
