Ive located a kalmaker set up to tune delcos,
Its got the red box and lead to connect to laptop,
Just after some info on what else i need?
What do i need to load onto the laptop?(programmes)?
Re writable chips?
Kalmaker
Re: Kalmaker
At a bare minimum you will need software. You may be able to use TunerPro RT but someone else (Antus, Dylan, VL400, etc) will know for sure. If you can't use TunerPro RT will will need to identify the ECM/PCM you have and then purchase the specific Kalmaker software for it. If it is an 808 you will need SP3 (or if you are really unlucky SP2) if it is something else you will need either SP3 or one of the Workshop series.
Re: Kalmaker
You will need there software and dongle to match. As they're programmed to go with each other.
-
antus
- Site Admin
- Posts: 9017
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Kalmaker
If its an 808 an includes the nvram and if its not too old and still working you'd be best of getting an eeprom programmer and putting our 12p software on it. Less hoops to jump through. Your choice though.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396