202 EFI, Slowwwwly
-
- Posts: 155
- Joined: Wed Jan 07, 2015 1:21 pm
- cars: hj ute, hz wagon, copious amounts of random half started side projects
- Location: Mid North Coast
202 EFI, Slowwwwly
well I'm finally going to put EFI on a 202, don't no why, i guess its just because i can, have a fair few 202s,reds and blues, and a stand to run them in so why not.
Getting wiring and a few other bits out of a pulsar for free.
just need to find a VK EFI manifold, save making my own at this time, already have fuel rail and injectors, also have tonnes of VN-VS, cars and parts, so that helps.
than it'll just be all the stuff for the computer and tuner pro.
Getting wiring and a few other bits out of a pulsar for free.
just need to find a VK EFI manifold, save making my own at this time, already have fuel rail and injectors, also have tonnes of VN-VS, cars and parts, so that helps.
than it'll just be all the stuff for the computer and tuner pro.
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
Re: 202 EFI, Slowwwwly
Make sure you post up plenty of pics. Will be a good project
- Holden202T
- Posts: 10330
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 202 EFI, Slowwwwly
anything related to a 202 and EFI is a good project in my books
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 155
- Joined: Wed Jan 07, 2015 1:21 pm
- cars: hj ute, hz wagon, copious amounts of random half started side projects
- Location: Mid North Coast
Re: 202 EFI, Slowwwwly
pulled the wiring, dizzy, and computer out of the pulsar tonight, what a job that was when its sitting onto of another car, would there be any sensors i should of grabbed, or all the vn-vs ones be fine?
next will be a manifold and all the hardware
next will be a manifold and all the hardware
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
Re: 202 EFI, Slowwwwly
The Pulsar one makes for less work when it comes time for re-working on the 202. A VNV6 one woud work but lots more work for the 202.
- Holden202T
- Posts: 10330
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 202 EFI, Slowwwwly
yeah sensors are fine from v6, CTS, and MAT are the main ones ....
if you can, put the CTS in the bottom of the thermostat housing, much more accurate than in the side of the head beside the exhaust port!
if you can, put the CTS in the bottom of the thermostat housing, much more accurate than in the side of the head beside the exhaust port!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 155
- Joined: Wed Jan 07, 2015 1:21 pm
- cars: hj ute, hz wagon, copious amounts of random half started side projects
- Location: Mid North Coast
Re: 202 EFI, Slowwwwly
awesome, im guessing i need to get the camira dizzy module as the pulsar one looks like its 4cyl only, also found a tbi camira wiring loom here at home, i think the dizzy could be here to, would it have the correct module, or just get a new one?
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
-
- Posts: 155
- Joined: Wed Jan 07, 2015 1:21 pm
- cars: hj ute, hz wagon, copious amounts of random half started side projects
- Location: Mid North Coast
Re: 202 EFI, Slowwwwly
wait dont worry, blonde moment, its the right one,
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell
- Holden202T
- Posts: 10330
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: 202 EFI, Slowwwwly
yeah not sure what the JD Camira uses for ignition module but certainly the JE is the right one for 202 conversion.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 155
- Joined: Wed Jan 07, 2015 1:21 pm
- cars: hj ute, hz wagon, copious amounts of random half started side projects
- Location: Mid North Coast
Re: 202 EFI, Slowwwwly
yer ill have to find the jd dizzy and have a look, so far ive worked out, i need a nvram, 808 comms, tunerpro rt, and im guessing a memcal burner and uv eraser?
why have one 202, when you can have 12 and counting, 30+ car graveyard just for fun aswell