new to tuning,need a lil help and $12 xdf file

[2inil8]

Hi all new to the forum
I have a vn v8 with 808 delco it had custom tune done,crane 304 cam
,torque power dual plane hi rise manifold,1000cfm throttle body
and use stock (grey) ls1 injectors which are 28lb.
Also it runs extremly rich to the point its blowing black smoke at idle
and wot.kinjflow was set at 0.10.
I under stood vn tune and xdf 5d etc
but ive since changed to the rs 232 board for faster aldl
easy instal as im good with electronics etc.
i have a vr v8 manul tune but cant find the $12 xdf file for it.
im using tuner pro rt and emulator and efi live.
Any help with file and advise would be much appreciated.

[VL400]

I would suggest changing to 12P, its far better defined and will give you better control. Can get it here .. https://pcmhacking.net/forums/viewtopic.php?f=27&t=356

[2inil8]

ok looks good, so is this the right xdf file .. OSE$12P_V100.xdf

[Dec_head]

No that one says v100
The ose110 download comes with the xdf in the package that matches.

[2inil8]

ok so its this one? OSE_12PV110.xdf

[Dec_head]

yes and use the bin marked 12p blcf in the folder as a base for the v8

If you really want to make things easy their is a nvram setup available in the for sale section it will let make instant changes without removing chips etc.

[2inil8]

I would have if i did buy a moates ostrich earlier,maybe i will down the track.
one thing i need help with is how to change injector values,vn has kinjflow
im not sure how this one works yet.

[Dec_head]

Map A: Run A/F Param - Displacement/inj flow rate (Litres/Grams per sec)

[2inil8]

cool thats what i thought what about map b?

[Dec_head]

map b is for a 2 bar map setup