Is Bench Wiring Pin out same for starting Ecotec

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
Pikey
Posts: 6
Joined: Fri Sep 09, 2016 11:05 am

Is Bench Wiring Pin out same for starting Ecotec

Post by Pikey »

Hey Guys, I have a few posts on my Rodeo/VX Ecotec conversion and have been trying to work out the wiring I need to start the car.
I have come across the bench wiring diagram on the forum and want to know if the bench pin out requirements is the same for my conversion, so if I was to connect the same wires will I be able to start the engine.
I have used the original wiring for stater and alternator, so I just need to connect the wires from the 3 plugs to start the engine
User avatar
The1
Posts: 4814
Joined: Mon Jan 04, 2010 10:23 am

Re: Is Bench Wiring Pin out same for starting Ecotec

Post by The1 »

we have all the wiring diagrams here for VX if that helps.
viewtopic.php?f=32&t=2272
Post Reply