pain in the fan(ny)

EPROM EEPROM SRAM NVRAM Flash chips, reading/writing hardware and software
'quipt4it
Posts: 675
Joined: Sun Oct 28, 2012 2:57 am

Re: pain in the fan(ny)

Post by 'quipt4it »

Dylan,
You do not have the required permissions to view the files attached to this post.
Top
Dylan
Posts: 3364
Joined: Mon Aug 02, 2010 8:35 am
cars: VR Commodore V8

Re: pain in the fan(ny)

Post by Dylan »

All good, don't be scared of 11P, man up and rip into it. It's the only way to roll.
Top
User avatar
antus
Site Admin
Posts: 10012
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: pain in the fan(ny)

Post by antus »

Yeah assume factory settings in 11p are good. Only change what you know you need to change due to hardware changes in your car. If in doubt usually leave it, or ask here.

For the other change, yes, cant change OS with tunerpro, need to flash with a programmer and because nvram is different size to factory eprom need to stack the tune. But... 11P is better.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Top
'quipt4it
Posts: 675
Joined: Sun Oct 28, 2012 2:57 am

Re: pain in the fan(ny)

Post by 'quipt4it »

Dylan wrote: Maybe an XDF error.
Thanks Dylan.
That was it.
Cheers
Top

Return to “Chip/Memcal Reading/Writing”