Hi All, Just checked out my VE table and thought I would share for your thoughts. I have a bit of jump in fuel at the 140kpa mark. This seems logical from what the car is doing, at WOT black puff of smoke and splutters especially in the lower rev range.
I did have a look at the $12P xdf... GeeZZ that is some seriously nice work, well done to all those involved!!! It does make the 5D look quite plain in comparison.
Tuner Pro MAP Translation help
-
simc
- Posts: 35
- Joined: Fri Apr 30, 2010 12:35 pm
- cars: supercharged v6 gemini
ba xr6 turbo
1966 v8 fairmont
Re: Tuner Pro MAP Translation help
You do not have the required permissions to view the files attached to this post.
Current Rides:
The Daily: BA XR6 Turbo
The Scary One: Supercharged V6 Gemini 10psi
The Cruiser: 1966 XR Fairmont V8
The Two Wheeler: Honda XR250R
The Wifes: VZ Wagon
The Daily: BA XR6 Turbo
The Scary One: Supercharged V6 Gemini 10psi
The Cruiser: 1966 XR Fairmont V8
The Two Wheeler: Honda XR250R
The Wifes: VZ Wagon
-
delcowizzid
- Posts: 5709
- Joined: Sat Feb 28, 2009 10:38 am
- Yahoo Messenger: [email protected]
- Location: Wellington NZ
Re: Tuner Pro MAP Translation help
maybe its your xdf messing with you mine is labelled 40 60 80 100 2.9 5.8 8.7 11.6 14.5 accross the ve table
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
-
simc
- Posts: 35
- Joined: Fri Apr 30, 2010 12:35 pm
- cars: supercharged v6 gemini
ba xr6 turbo
1966 v8 fairmont
Re: Tuner Pro MAP Translation help
Ahh Just downloaded your V2.. easier to work with, still look like I have too much of an aggressive jump in fuel after the 5psi mark?
You do not have the required permissions to view the files attached to this post.
Current Rides:
The Daily: BA XR6 Turbo
The Scary One: Supercharged V6 Gemini 10psi
The Cruiser: 1966 XR Fairmont V8
The Two Wheeler: Honda XR250R
The Wifes: VZ Wagon
The Daily: BA XR6 Turbo
The Scary One: Supercharged V6 Gemini 10psi
The Cruiser: 1966 XR Fairmont V8
The Two Wheeler: Honda XR250R
The Wifes: VZ Wagon
-
rsneha
- Posts: 1
- Joined: Tue Nov 27, 2018 1:01 pm
- cars: Mercedes
Re: Tuner Pro MAP Translation help
Also try https://www.easyunitconverter.com/ to convert all measurement calculation.delcowizzid wrote:http://www.asknumbers.com/kilopascal-to-psi.aspx 190kpa is 13.05psi
Last edited by rsneha on Wed Mar 25, 2020 6:36 am, edited 2 times in total.
-
heff0018
- Posts: 1061
- Joined: Tue Apr 21, 2015 3:42 am
- cars: CL valiant charger, VH valiant charger
Re: Tuner Pro MAP Translation help
Yep, as Holden 202 said.