my ride vt ecotec

[vt3.8lt]

figured it out but the table only goes to 6375rpm will my pump cut out above that? or is there a way to get the table to go above that as my limiter is set to 6500rpm??

[Dylan]

Maybe try another value like coolant temp or TPS and boost

[VL400]

figured it out but the table only goes to 6375rpm will my pump cut out above that? or is there a way to get the table to go above that as my limiter is set to 6500rpm??

Bottom of page 6 of the advanced guide has your answer .. viewtopic.php?f=28&t=3051

[vt3.8lt]

ok cool thanks for the reply if im reading this right then as long as its in the kpa range ive selected then the pump will still be on above the limits of the map???

[Holden202T]

outside the limits of the map it uses the last value in the map, so if that's on, it stays on still it come back into the map!

I have mine setup like this for second pump on with boost, I set it to come on over 105kpa and above 3200rpm (I use 2 step rev limiter on 3000rpm)