Coil Pack Testing
-
Dylan
- Posts: 3364
- Joined: Mon Aug 02, 2010 8:35 am
- cars: VR Commodore V8
Re: Coil Pack Testing
Interesting report there gtrboy thanks. On a mate's V6 we removed old MSD coils and fitted yellow jackets with a noticeable gain. They've aged a bit now so might look to upgrade this way to. Thanks
-
gtrboyy
- Posts: 197
- Joined: Sun May 21, 2017 3:55 pm
- cars: vp 'moo mang' ute
torana
bombadores - Location: Sydney
Re: Coil Pack Testing
The gorst are better value at $60 if you have time to wait for them...delphi coils were in stock $80-90 & finding most issues with vp ute caused by non-genuine items even though parts tested within specs like the yellow jackets.
Last edited by gtrboyy on Tue Sep 26, 2017 10:51 am, edited 1 time in total.
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: Coil Pack Testing
the 2 dead MSD's ive tested when they die they dont die like factory coils they still output 30mm of spark or so compaired to 10mm of a dead N/A coil, which is enough to keep a N/A going happy with a miss here and there, So without testing you wouldn't really know. In general reading and talking to a few people in conversations about coils MSD's seem to generally have a bad wrap because of the failure rate and also splitting open, perhaps something they've tried to fix in the latest Revision, time will tell.
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: Coil Pack Testing
How did you go?L67PSI wrote:These are some pics of the Ali Express - Gorst Coils that The1 linked to earlier. I got them in 18 days from China to Perth. $60 and change delivered to the door.
I've put them on my modded VT L67 Calais. I plan on opening up the spark plug gap from 1.1mm to stock 1.3mm and see how it performs.
-
L67PSI
- Posts: 181
- Joined: Mon Dec 12, 2016 1:27 am
- cars: L67 VT Calais
Re: Coil Pack Testing
I need to replace radiator in Mrs car first, then get onto this. Will keep everyone posted.
-
L67PSI
- Posts: 181
- Joined: Mon Dec 12, 2016 1:27 am
- cars: L67 VT Calais
Re: Coil Pack Testing
I fitted a new set of NGK BPR6EF-13 into my VT L67 today. It pays to check the gaps as they were all approx 1.2mm. Gapped them all to 1.3mm and will test it out.
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: Coil Pack Testing
Awesomee
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: Coil Pack Testing
Was sent 2 new mace coils to test, they look like Rev2 MSD's they test the same to 48 and 50mm, have updated the graph.
You do not have the required permissions to view the files attached to this post.
-
0081
- Posts: 226
- Joined: Fri Jul 09, 2010 12:01 pm
- cars: VY s L67
Haines Hunter - not a car but still a toy
Re: Coil Pack Testing
ZZP have released a new coil also.
They say it's a high output. Most likely just like the MSD ones.
Be good to test one of them also
They say it's a high output. Most likely just like the MSD ones.
Be good to test one of them also