gemini tuning help

[djbrooksy]

hi guys
sorry to be the pain in the ass noob, but if one of the brain trust could look at this log

run4 block.xdl

and give a few pointers please it would be a great help

heres the bin if need

$12P-V112-IsuzuG200W.bin

seems to run ok but still rich biggest issue is coming back to idle. it seems to want to run on

[Dylan]

Is the wideband reading in the logs correct before we get to far?
What model are you using?

[djbrooksy]

Wideband is a lc-1 and to best of my knowledge it is
0v and 5v set in the bin to the defaults for it

[delcowizzid]

get the alternator charging properly too will change your fueling and i guess change the ppk or are you really doing 200+kmh at low rpm lol once the ppk is changed it will know you are coming to a stop and kick into idle mode somewhere around 5kmh with the wrong ppk its seeing you travelling fast

[Dylan]

I could be wrong but isn't innovate 7-22 AFR? Or have you got a seperate gauge to compare against?

[djbrooksy]

According to the manual that came with the kit
0v 7.35 ARF. 5v 22.39 ARF as default.

And was looking into speed sensor anyway, didn't even give it a thought about how much it would effect

[djbrooksy]

Hi guy I'm still plugging away. car seems to go ok when just poking along but still very flat feeling

$12P-V112-brooksygem.bin

long.xdl

last log and bin for anyone interested.

[Charlescrown]

Something screwy with your map readings. Looks like your got the wrong map sensor fitted or it's faulty. It's showing readings up to 280kPa and you have the switches set for naturally asp.

[delcowizzid]

You using the 3bar adx by mistake Charlescrown lol

[Charlescrown]

I did because both the nat and 2 bar went off the graph. Something is not right with the map readings.