hey guys just need to confirm if anyone knows if its pin d8 on a 808 ecu where i put the 0-5v wideband controller output to for logging with 12p on the nvram? is there anything else i have to do or watch out for before installing it to pin d8 i dont want to fry my ecu?
cheers
wideband input pin on 808 ecu?
-
vnsswithcam
- Posts: 79
- Joined: Sat Mar 20, 2010 3:20 am
- cars: vt ss commodore
- Location: penrith n.s.w
wideband input pin on 808 ecu?
one point twenty one jiggawatts!!!! great scott!!!
-
VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 4:54 am
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
Re: wideband input pin on 808 ecu?
Yep it is pin D8, the pinouts are in the zip with 12P, or can download the PDF antus did from here .. https://pcmhacking.net/forums/viewtopic.php?f=27&t=356
You also need to set the bin to suit the wideband output volatges and how they relate to the AFR. They are under the wideband scalars in TP5.
You also need to set the bin to suit the wideband output volatges and how they relate to the AFR. They are under the wideband scalars in TP5.