How to convert a 202 to Delco

Converting To Delco ECU From Carby Or Other Injection Systems
Posts: 3
Joined: Sun Jun 12, 2016 7:24 pm

Re: How to convert a 202 to Delco

Postby ballrash » Sun Jun 12, 2016 8:34 pm

cheers dylan well that sounds pretty straight forward. i'd say the camira module would be the easiest to setup so i'll see if i can track one down & plug to suit.
Appreciate the quick response.

Posts: 4
Joined: Wed Dec 20, 2017 4:28 pm

Re: How to convert a 202 to Delco

Postby vkcalais202 » Wed Dec 20, 2017 5:23 pm

Hello everyone,

Merry Christmas

I am looking a converting my 1985 VK Calais efi 202 to delco

Just to clarify I can use a JE Camira, LD Astra or N13 pulsar wiring loom as they are the same engine, Is this correct ?

Thankyou

vkcalais202

User avatar
Posts: 9844
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: How to convert a 202 to Delco

Postby Holden202T » Thu Dec 21, 2017 10:53 am

i dunno about the astra, but the other two yes.

Posts: 4
Joined: Wed Dec 20, 2017 4:28 pm

Re: How to convert a 202 to Delco

Postby vkcalais202 » Thu Dec 21, 2017 8:58 pm

Thanks Holden202T

I thought the Holden LD Astra was the same as a Nissan N13 pulsar (rebadged). Same as a Toyota Lexcen and Holden Commodore

The Nissan N13 pulsar is easier to find than the Holden JE camira in my area

They all have the Holden Family II 4cyl engine

Thanks

vkcalais202

User avatar
Posts: 9844
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: How to convert a 202 to Delco

Postby Holden202T » Sun Dec 24, 2017 2:02 pm

either way if you cant find them you can easily mod a V6 commodore loom.

Posts: 1244
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: How to convert a 202 to Delco

Postby Charlescrown » Sun Dec 24, 2017 3:56 pm

I think the Pulsar has a longer loom with the ECU under the passengers seat. I personally would use a VN loom with 6 injector plugs and knock sensor wiring. It will need a bit of chopping and relay wiring though.

Site Admin
User avatar
Posts: 5828
Joined: Sat Feb 28, 2009 8:34 pm

Re: How to convert a 202 to Delco

Postby antus » Wed Dec 27, 2017 2:36 pm

Yeah the LD astra is correct. In my area there are usually more N13 pulsars but any of the above will do. The 4 Cylinder EFI looms are seperate from the main loom so that is nice but you need to make sure you end up with the right connectors for the ignition module and right number of injectors.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 4
Joined: Wed Dec 20, 2017 4:28 pm

Re: How to convert a 202 to Delco

Postby vkcalais202 » Sat Dec 30, 2017 7:42 pm

Hi,

I picked up a JE Camira efi wiring loom, JE Camira ECU, some sensors and VN V6 throttle body today from Upullit Adelaide for $143

All I need to do now is the conversion and get the ECU remapped and I am good to go

Thanks

Michael

User avatar
Posts: 9844
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: How to convert a 202 to Delco

Postby Holden202T » Sun Dec 31, 2017 9:08 am

sweet that's a good start :)

theres a bin file in the custom tunes section for a stockish 202 with 808 ecu, it should get you started down the right path.

Posts: 4
Joined: Wed Dec 20, 2017 4:28 pm

Re: How to convert a 202 to Delco

Postby vkcalais202 » Sun Dec 31, 2017 6:43 pm

Hi,

A couple quick questions about the 202 delco conversion

1. When I am modifying the 202 distributor can I use the original factory pulse generator inside ?

2. The two black wires coming from the pulse generator, can they plug straight into the new ignition module mounted underneath the old one ?

I am sure there will be more questions to come as I go further into this project

Thanks

vkcalais202

PreviousNext

Return to Delco ECU Conversions

Who is online

Users browsing this forum: No registered users and 3 guests